Article to check disk drive for Errors and Badblocks
badblocks is a Linux utility to check for bad sectors on a disk drive
A bad sector is a sector on a computer's disk drive or flash memory that cannot be used due to permanent damage or an OS inability to successfully access it. It creates a list of these sectors that can be used with other programs, like mkfs, so that they are not used in the future and thus do not cause corruption of data. It is part of the e2fsprogs project.
It can be a good idea to periodically check for bad blocks. This is done with the badblocks command. It outputs a list of the numbers of all bad blocks it can find. This list can be fed to fsck to be recorded in the filesystem data structures so that the operating system won’t try to use the bad blocks for storing data.
The following example will show how this could be done.
From the terminal, type following command:
$ sudo badblocks -v /dev/hda1 > bad-blocks
The above command will generate the file bad-blocks in the current directory from where you are running this command.
Now, you can pass this file to the fsck command to record these bad blocks
$ sudo fsck -t ext3 -l bad-blocks /dev/hda1
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Check reference counts.
Pass 5: Checking group summary information.
/dev/hda1: ***** FILE SYSTEM WAS MODIFIED *****
/dev/hda1: 11/360 files, 63/1440 blocks
If badblocks reports a block that was already used, e2fsck will try to move the block to another place. If the block was really bad, not just marginal, the contents of the file may be corrupted.
Looks at badblocks man pages for more command line options